LINKSYS Router Page | Linksys Smart Wi-Fi

Access Linksys Router Page

linksys router page access
You can Access Linksys Router Page using These Steps

The Linksys router login page accessing process is very simple and it only takes a couple of minutes of the user’s time. The user can simply type www.linksyssmartwifi.com and enter the default information appropriate for the router to access the Linksys router admin page. The default username and password is “admin” for most of the Linksys routers. The username and password are case sensitive.

Here, we will show you the troubleshooting steps to access the Linksys router page and Linksys router login page, to reset the router, to change the default username and password and to update the firmware for the Linksys routers.

 Access Linksys Router setup page 

  1. Connect the modem to the WAN port of the router using an Ethernet cable. Make sure that the connections are made properly.
  2. Now, connect the desktop computer or laptop to any of the four Internet ports of the router using another Ethernet cable. Double check the connections made.
  3. Open any internet browser of your choice and type linksyssmartwifi.com in the address bar to access the Linksys router smart Wi-Fi page.
  4. The user will be prompted to enter the default information regarding the router. The default username and password is “admin” for most of the Linksys routers. The username and password are case sensitive.
  5. Once the router has been logged in, the user will be taken to the Linksys router setup page.

Now, the user’s router will have been setup properly. The user can start using their router as they desire.

 Access the Linksys Router login page

  1. Open any internet browser of your choice and type linksyssmartwifi.com in the address bar. Press Enter.
  2. You will be taken to the Linksys router admin page where the user will be prompted to enter the default information regarding the router.
  3. The default username and password is “admin” for most of the Linksys routers. The username and password are case sensitive.
    In case the router doesn’t let you access the Linksys router access page that means the user might have changed the default information. Try any other previously set passwords. If all else fails, the router will have to be restored back to its factory default settings.
  4. Once the Linksys router has taken you to the Linksys router access page, that means the router will have been logged in by the user. Now, the user can further configure their network themselves.

Reset Linksys router 

The router can be reset if the user either forgets or loses the information of the router. Take note that if the user chooses to reset the router, their personalized settings will get reset too. Here are the steps to reset the Linksys router:

  1. Locate the Reset button at the back of the router. It might be labeled as Reset or Restore Factory Default Settings. The option may vary for different router models.
  2. Using a small pin or something similar, press and hold the reset button for about ten seconds.
  3. After holding the reset button for ten seconds, release the button. The LED lights at the front of the router will start blinking. Once the power light becomes stable, the router will have reset.

Warning: Do not reset the router again and again. It might corrupt the firmware of the router.
Once the router has been restored back to its default settings, the user can login to the router using the default information and go on to customize their network suitable to their needs.

Change the default username and password on Linksys router Page

It is recommended that the username and password is changed so that not just anybody can access the network without the user’s permission. Make sure that the username does not contain any private information as the username is visible to other devices in the router’s coverage area. Also, make sure that the password is hard for other people to guess. Here are the steps to change the username and password for the Linksys router:

  1. Login to the router by going to www.linksyssmartwifi.com in any internet browser of your choice.
  2. You will be prompted to type in the default username and password. The default username and password for most of the Linksys routers is “admin” for both the cases.
  3. The web based interface will appear.
  4. Click on Administration. Click the Management tab under it.
  5. Here, you will see the Router Username and Router Password.
  6. You can setup the new username and password for your router in front of the respective fields.
  7. Click Save Settings to save the settings made.

Now, you can login to your router using the new information. You can go on to connect as many devices as you please by entering the new information.

 Updating the Firmware on your Linksys router Page

The firmware is one of the most important parts of the router. The firmware is basically the software that runs the hardware on the router. The firmware must be updated in order to keep the router and the security in check. A Firmware update makes sure that the router stays compatible with the latest media devices so that the user doesn’t have to go around buying new routers every time they wish to buy a new media device. All the sensitive data of the user passes through the router such as the private information of the user, their emails and passwords, their banking information when they buy something online and more. The firmware update makes sure that the security on the router is kept up to date as well.

Here, we will show you the troubleshooting steps to update the firmware for the Linksys router using the Linksys router access page:

  1. Open an internet browser and go to the Linksys Support Site from the device that is connected to the Linksys router. Download the latest firmware for your router and save it to the desired location.
  2. Now, open an internet browser and type linksyssmartwifi.com in the address bar. Press enter.
  3. You will be prompted to enter the default information of the router. The default username and password are “admin” for both the cases. The username and password are both case sensitive.
  4. You will be then taken to the Setup page of the router. Click Administration and then click the Firmware Update option.
  5. Click Browse to search the previously downloaded file.
  6. Locate the previously downloaded file from the computer. Click Open.
  7. Click the Start Update button to begin the update process.
    It is recommended that the update process isn’t interrupted anyhow as it can damage the router and even render it useless.
  8. After the update is successful, click Continue.
  9. Reboot the router so that the changes can be implemented.

The firmware of your router will be successfully updated. The user can start using their router as they desire